(Switch to Advanced before you start. If you’ve completed this section, you will see 19 changes to be committed.
Boot Config
Boot Sequence:
* DVD
* SSD
Enable Secure Boot:
* OFF (Default)
Enable Microsoft UEFI CA:
* OFF (Default)
Secure Boot Mode:
* Audit Mode
Integrated Devices
Audio:
Off - Enable Microphone
Storage
SATA/NVMe Operation:
* AHCI/NVMe
Connection
Intregrated NIC:
* Enabled - The internal LAN is enabled
HTTP Boot:
* On (Default)
Power
Enable USB Power Share:
* ON
Enable USB Wake Support:
* OFF
AC Recovery:
* Power OFF
Aspm:
* Disabled
Block Sleep:
* ON
Deep Sleep Control:
* Disabled
Security
Absolute:
* Disable Absolute
UEFI Both Path Security:
* Always
Password
Admin Password:
* enter
Password Changes:
* OFF
Update,Recovery
Enable UEFI Capsul Firmware Updates:
* OFF
Support Assist OS Recovery:
* OFF
BIOS Connect:
* OFF
Auto OS Recovery Threshold:
* OFF
System Management
Wake on Lan/WLan:
* Lan OR WLan
Auto On Time
* Disabled (Default)
Pre-Boot Behavior
Extend Bios Post Time:
* 5 Sec
Virtualization
Enable Intel Vrit Tech
* ON
VT for Direct I/O
* OFF
uncheck enable VT for Direct I/O